Foxwell NT301 Auto OBD2 EOBD Code Reader Check Engine Scanner Diagnostic Tool

Description

➤1. Check engine/live O2 sensor test data, ➤2. One-click readiness key, ➤3. On-board monitoring test, ➤4. Display fault code definition automatically with HELP Button to get Possible Causes, ➤5. OBDII monitors supported: Misfire Monitor, Fuel System Monitor, Comprehensive Components Monitor, Catalyst Monitor, Heated Catalyst Monitor, Evaporative System Monitor, Secondary Air System Monitor, Air Conditioning Refrigerant Monitor, Oxygen Sensor Monitor, Oxygen Sensor Heater Monitor, Exhaust Gas Recirculation System Monitor ➤6. Supported OBD2 Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), CAN (Control Area
Store category
Sign Up Now !
You may also like
Foxwell NT301 Universal Car Engine Code Reader Scanner OBD2 Diagnostic Tool
Product Description
Foxwell NT301 Support Full 10 Engine System Functions：
*
Reading Codes:
Show the detailed description of the Diagnostic Trouble Code (DTCs)
*Erasing Codes & Reset:
Turns off Check Engine Light (MIL), clears codes and resets monitors.
*Data Stream:
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
*I/M Readiness Status:
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
*Read Live Data Stream:
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
*View Freeze Frame Data:
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
*O2 Sensor Test:
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
*On-Board Monitor Test:
Retrieves and displays test results for emission-related powertrain components and systems.
*Read Vehicle Information:
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
*
Component Test:
Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Enhanced OBD II functions
*LED Notifications:
Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle.
*Data Log:
The NT301 auto code reader records PIDs for later use to help you diagnose intermittent driving performance problems which can not be determined by any other methods.
*DTC Help:
Press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.
*VIN Retrival:
Automatic VIN acquisition and decoding make it much easier to read manufacturer specific codes and enhanced mode 6 data.
*Print Data:
If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.
OBDII/EOBD CODE READER NT301 Features:
1. NT301 does not only read and clear engine system faults, Display fault code definition automatically, it also shows live vehicle sensors data in text and graph format, and allows you to focus on any suspicious or symptom-specific data parameters.
2. It reads freeze data, which shows engine conditions such as fuel trim, engine coolant temp, etc., at the time the malfunction indicator lamp (MIL) was set.
3. Automatic VIN acquisition and decoding makes it much easier to read manufacturer specific codes and enhanced mode 6 data.
4. Clearly arranged keypad, menu-driven navigation, hotkeys and 2.8" TFT color screen together make it extremely easy to use.
5. OBDII monitors supported: Misfire Monitor, Fuel System Monitor, Comprehensive Components Monitor, Catalyst Monitor, Heated Catalyst Monitor, Evaporative System Monitor, Secondary Air System Monitor, Air Conditioning Refrigerant Monitor, Oxygen Sensor Monitor, Oxygen Sensor Heater Monitor, Exhaust Gas Recirculation System Monitor
6. Supported OBD2 Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), CAN (Control Area Network ISO 11898).
FOXWELL NT301 Support Car Models:
* American (USA) car
Compatible with 12V Standard OBD2 Cars from 2001 to Now:
for Chrysler, for Ford, for GM, for Jeep
* European car
Compatible with 12V Standard OBD2 Cars from 2004 to Now:
for Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Volvo, for Fiat, for VW, for Ford, for Jaguar
* France Car
Compatible with 12V Standard OBD2 Cars from 2006 to Now:
for Peugeot, for Citroen,
Not Support for All Renault vehicles
as:Not Support for Renault Clio 2/Megane/Dacia Logan / .etc
* Japanese car
Compatible with 12V Standard OBD2 Cars from 2007 to Now:
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus , for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota
* Chinese car:
Compatible with 12V Standard OBD2 Cars from 2011 to Now:
for BYD, for Chery, for Geely, for Great Wall, for Karry
NOTE:
Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.
Please Leave us message in below format, we will reply you on working time.
for example : xx, 2005, 2.0cc, Diesel
Warning:
Not Support Russian Cars VAZ,UAZ,LADA ;Not works with trucks
Not Support for All Renault vehicles
For Ssangyong Actyon , from 2009 to 2017 years.
For Ssangyong Korando , 2.0 TD Diesel , from 2013 to 2017 years.
For Ssangyong Kyron , 2.0 Diesel , from 2010 to 2017 years.
For Ssangyong Rexton , 2011 to 2017 years
FOXWELL NT301 Diagnostic Tool Support Languages :
Three multilingual package for options:
(1) English , Spanish, French , German, Italian
(2) English , Portuguese , Hungarian, Dutch , Swedish
(3) English, русский
FOXWELL NT301 Free Update Forever
Stpe1: Download the update tool from foxwell official website, connect the NT301 to PC and login in the foxwell program , the device will be automatcially detected.
Stpe2: You can go to setting , select the language of your software package.
Step3: Click online update, it will download the software, then click on Offline update, you may install the patch.
Note:
All of our user manual are English in the package,But we have French ,Spanish ,German language user manual on the foxwell office website, (foxwelltech.com).you can download it yourself, thanks ！
FOXWELL NT301 Specification
Display: 2.8"TFT color screen
Operating Temperature: 0 to 60 (32 to 140)
Storage Temperature: -20 to 70 (-4 to 158)
Power: 8 to 18 V provided via vehicle
Supported Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898
Weight: 0.6Kg
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1.We accept payment by PayPal only !
2.Payment should be completed Within 8 days after buyer places the order, or else an ebay Unpaid Case will be opened .
3.If you Can Not Pay in time or Don't Want to Buy this product any more , please Cancel the transaction Before the Unpaid Case is Opened.
Delivery details
1.All of the items will be shipped to buyer's EBAY address,please confirm your address on Ebay before you buy.
2.Your order will be usually shipped out the same or next business days once the payment is made and cleared, except on weekends and holidays.
3.Most of products are checked and tested carefully before shipment.Well Packed protects your items with suitable material so as to avoid damage during transit.
4. If your package delayed few days, due to any unexpected factor, please wait patiently. your kind understanding would be highly appreciated!
Terms of sales
1. We can not guarantee that you will be able to access every module or use every piece of cd/dvd software. Compatibility varies due to variations in the cars modlue or availabilty of year it released from original factory
2.It's the buyer's responsibility to complete clearance when parcel reached your Customs.
3.We are not responsible for buyers's local taxes, please consult local Customs for Tax Details.
About us
We are eager to be your professional parner of automobile diagnostic tool.
We support remote assistance by Teamviewer if you have any difficulty in software installation.
Contact us
1. We are committed to providing customers with the best products and services
，
Please do not hesitate to leave us your positive feedback if you are satisfaction with our products ,delivery or services .
2. If you have Any Questions, Please do not hesitate to Contact Us by email/ ebay message. We will reply you within 12 hours and do our best solve the problem with you
（
Except on Weekends and Holidays
）
.
3.Work time:GMT8 (9:00am-18:30 PM) ,Except for Saturday (9:00-11:00AM) .
Feedback